Winter Driving Safety Tips

Kathleen Hansen - 2015-12-15

Falling snow can be picturesque, but it can also wreak havoc on the roads. While no one enjoys driving in snowy or slippery conditions, there are steps you can take to help improve your safety with these winter driving tips.

 

Here are some guidelines that can help you stay safe when driving in adverse winter conditions:

· Make sure your car is prepared for cold temperatures and wintery conditions like snow and ice. Keep your equipment properly maintained and include a winter survival kit in your vehicle: an ice scraper, snow shovel and sand/salt.

·         Clear snow and ice off your car - including windows, mirrors, lights, reflectors, hood, roof and trunk.

·         Drive with your headlights on, and be sure to keep them clean to improve visibility.

·         Use caution when snow banks limit your view of oncoming traffic.

·         Avoid using cruise control in snowy or icy conditions. In adverse conditions, you want as much control of your car as possible.

·         Know how to brake on slippery surfaces. Vehicles with anti-lock brakes operate much differently from those that do not have anti-lock brakes. You should consult your vehicle's owner's manual for instructions on how to brake properly if your vehicle should start to skid.

·         Maintain at least a half tank of gas during the winter season. This helps ensure you have a source of heat if you are stuck or stranded.

·         If you do venture out or are unexpectedly caught in a snowstorm and encounter problems, stay in your car and wait for help. You can run the car heater to stay warm for 10 minutes every hour, but make sure your exhaust pipe is clear of snow. There is a danger of carbon monoxide  if snow blocks the pipe and enables the deadly gas to build up in your car. Open your window slightly to help prevent the buildup.

·         Keep your windshield washer reservoir full, and make sure your car has wiper blades that are in good condition.

·         Remember that speed limits are meant for dry roads, not roads covered in snow and ice. You should reduce your speed and increase your following distance as road conditions and visibility worsen.

·         Be cautious on bridges and overpasses as they are commonly the first areas to become icy.

·         Avoid passing snow plows and sand trucks. The drivers can have limited visibility, and the road in front of them could be worse than the road behind.

·         Monitor road and weather conditions by checking local news stations or Internet traffic and weather sites.

·         If you must travel during a snowstorm or in blizzard conditions, be sure to let a relative, friend or coworker know where you are headed and your expected arrival time. Avoid the temptation to check or be on your phone while driving as all of your attention should be on arriving safely.

 

Blog Home - View a complete list of our articles

Comments:

Warrantech Says:
Before driving you need to make a plan about journey and collect all information about the weather and road conditions because during winters road conditions are very bad. Drive with your headlights on, and be sure to keep them clean to improve visibility. Avoid shortcuts like bridges and shady alleys.
Toco warranty Says:
By following all these tips we can make sure that we see best results for our vehicle. We all know that driving in winters is quite dangerous so avoid driving at that time if it is possible.

Leave a Comment:



Please note: Comment moderation is enabled and may delay your comment. There is no need to resubmit your comment.

Executive Insurance & Financial Services

Top